Jesmonite Flexiguard Sealer - Industrial Plasters
My AccountLog in
Your Cart
  • 0 Items
  • Total £0.00
View
There are no products in your cart.
You are here:
  • Back
  • Jesmonite Flexiguard Sealer

  • Jesmonite AC730 Flexiguard Sealer

  • JSEFLEX01
Flexiguard Sealer is a solvent-free, stain resistant formula specifically designed to coat porous substrates such as Jesmonite AC730 and AC830. Once applied, a protective layer less than 100-nm thick bonds with the inner pores of the substrate to leave a smooth, anti-stain, non-discolouring surface layer.
 
The coating is optically clear, UV stable, chemically inert and extremely durable, having both hydrophobic and oleophobic capabilities. It will not peel or flake and is unaffected by extremes of temperatures from -20°C to +350°C. Flexiguard offers protection against efflorescence, embedded and ingrained soiling, mould or fungal growth, abrasion and frost damage. It also protects against chemical attack, including oxide corrosion by acid rainwater, corrosion by salt and other climatic coastal and marine conditions.
 
Although designed for AC730 and AC830, Flexiguard Sealer can also be used for AC100.

 

TYPICAL PROPERTIES

Physical form/appearance:    Liquid

Colour:                                    Slightly yellowish, slightly cloudy

Odour:                                     Almost odourless

pH:                                           Value (500g/l) @ 20°C ca. 4

Density:                                   ~1.0g/cm3

Boiling point/boiling range:    97°C.

Solubility in water:                  Soluble @ 20 ° C

Flashpoint:                              > 66°C

 

APPLICATION AREAS

We recommend that Flexiguard Sealer is spray applied as a mist coat onto the surfaces of AC730, AC830 and AC930. It is important to ensure that all surfaces are clean, dry, and free from any grease or oil.

 

KEY ATTRIBUTES

The existing surface quality is preserved, becoming highly water and grease repellent, and resistant to ingrained soiling, mould, fungal growth. Contaminates are unable to adhere to the surface. Cleaning becomes much easier and less frequent – typically requires 50-70% less often – and withstands high-pressure cleaning (up to 50-60 Bar). The lifespan of the substrate is extended because of reduced cleaning cycles. The surface remains clean and will not discolour

 

 

You might also like