Biresin G27 is a high quality, fast cast, 2 part polyurethane casting resin which is widely used for pattern and model making. It has an easy to use 1:1 mix ratio and has a very low viscosity, so the good followability will pick up the finest of detail from your mould. Although Biresin G27 is pre-filled, so is not normally used with any added filler, it can be filled for some applications. Beige in colour.
G27 Setting Times
Pot life: 1 minute 15 seconds
Demould time: 20 minutes
PLEASE NOTE: You need to order Biresin G27 Part B (Hardener) as a separate item.
We also stock Biresin G26 which is similar but with a longer Pot life and Demould time.
Both components must be shaken well before use. Please also pay attention to dry conditions and dry mould surfaces while processing.