Biresin G26 is a high quality, fast cast, 2 part polyurethane casting resin which is widely used for pattern and model making. It has an easy to use 1:1 mix ratio and has a very low viscosity, so the good followability will pick up the finest of detail from your mould. Although Biresin G26 is pre-filled, so is not normally used with any added filler, it can be filled for some applications. Beige in colour.
The cast produced by Biresin is extremely touch and practically unbreakable, even when cast very thin, making it ideal for casting small and delicate models.
G26 Setting Times
Pot life: 3-4 minutes
Demould time: 30 minutes
PLEASE NOTE: You need to order both Biresin G26 Part A and Part B.
We also stock Biresin G27 which is similar but with a quicker Pot life and Demould time.
Both components must be shaken well before use. Please also pay attention to dry conditions and dry mould surfaces while processing.
