Prestia Casting Plaster - Industrial Plasters
My AccountLog in
Your Cart
  • 0 Items
  • Total £0.00
There are no products in your cart.
You are here:
  • Back
  • Prestia Casting Plaster

  • Trade deals available on this product. For larger quantities, please enquire.

  • PRE04925
  • QuantityPriceSaving


Prestia Casting plaster is an unformulated fine plaster of Paris produced from high purity natural gypsum, quarried and calcined in the Paris area.  Prestia Casting plaster is suitable for decorative and fibrous moulding work needing a quick set time. Prestia Casting plaster conforms to EN13279-1 Building Plasters Standard.


This is true Plaster of Paris, as it is quarried and calcined in the Paris area.  Imported directly by ourselves in volume, its carbon footprint could hardly be lower, and if disposed of correctly it is recyclable - the waste stream is used in the manufacture of plasterboard, for instance, and as gypsum it is one of the few materials in the world that can be recycled again with no discernible degradation to the final product.


Prestia Casting plaster must be stored in its original shrink wrapped pallets, or single bags must be stored avoiding direct contact with the ground, and protected from water/moisture contamination.  It is recommended to use the product within 6 months from the date of manufacture printed on each bag.



Plaster/Water Ratio: 100 / 69 to 80

Working Time: 13 Mins

Demould Time: 35-45 Mins

Expansion: 0.15%

Compressive Strength: 11 Mpa

Yield (1kg mixed) - 1m² at 1mm thick

You might also like