My AccountLog in
Your Cart
  • 0 Items
  • Total £0.00
There are no products in your cart.
You are here:
  • Back
  • Fibrocem

  • Available in Fibrocem Casting, Fibrocem Pre-Coat & Fibrocem Normal Backing Render grades

  • FIB04800
  • Add to Cart

  • QuantityPriceSaving

Fibrocem is a material primarily designed for production of durable exterior embellishments of high strength and fine definition.  It has a rapid turn round time of around 2.5 – 3 hours, providing a cost and time efficient system of casting.  The finish is a pale Portland Stone which is alkali resistant.  Extremely easy to use, simply add water and mix, and it can be cast into most types of moulds.  A 25kg bag will give you approximately 9mm thick per square metre.


Available from stock in 3 grades:-

  • Fibrocem Pre-Coat:  A fibre-free version for use as a preparation coat, to achieve a fine smooth surface
  • Fibrocem Casting:  The primary casting material, with fibres
  • Fibrocem Normal Backing Render:  A slower setting version of Fibrocem Casting


This material is known to suffer from compaction lumps in the un-used bags.  This can be from being on the lower layers of a pallet, or from being un-used for a while.  It's best to knock-up the material in dry form, and/or crushing up lumps by hand, before adding water. 


For additional information, please click here for Info Sheet. 

You might also like