My AccountLog in
Your Cart
  • 0 Items
  • Total £0.00
View
There are no products in your cart.
You are here:
  • Back
  • Biresin G27 Part B (Hardener)

  • Biresin G27 is a high quality, fast cast, 2 part polyurethane casting resin which is widely used for pattern and model making. It has an easy to use 1:1 mix ratio and has a very low viscosity, so the good followability will pick up the finest of detail from your mould. Although Biresin G27 is pre...

  • BIRB12102

Biresin G27 is a high quality, fast cast, 2 part polyurethane casting resin which is widely used for pattern and model making. It has an easy to use 1:1 mix ratio and has a very low viscosity, so the good followability will pick up the finest of detail from your mould. Although Biresin G27 is pre-filled, so is not normally used with any added filler, it can be filled for some applications. Beige in colour.

 

G27 Setting Times

Pot life:                   1 minute 15 seconds

Demould time:         20 minutes

 

PLEASE NOTE:  You need to order Biresin G27 Part A (Resin) as a separate item.

 

We also stock Biresin G26 which is similar but with a longer Pot life and Demould time.

 

Both components must be shaken well before use. Please also pay attention to dry conditions and dry mould surfaces while processing.

You might also like