Jesmonite AC100 is a water-based, two-component, acrylic polymer/mineral resin system. The system is suitable for a wide range of casting and laminating applications where the end user wants to reduce the many risks associated with conventional solvent based systems. A range of ancillary products including decorative and functional fillers, control chemicals, pigments and glass reinforcements are also provided making the material extremely versatile. The material is suitable for internal and external use, however if used externally a sealer or suitable paint system is recommended to protect surface appearance.
Jesmonite AC100 liquid is used with the Jesmonite AC Powder, so you'll need to order this separately. The standard mix ratios is 3:1 powder to liquid, however this is reduced to 2:1 powder to liquid if you are adding filler powders.
Mix Ratio 3:1 parts Powder to Liquids ratio by weight
Wet Density 1845 kg/m3
Dry Density 1745 kg/m3
Initial set 15 – 20 minutes (18°C, No Retarder)
Expansion on set 0.15%
Compressive Strength 25 – 30 MPa
Tensile Strength (UTS) 25 – 35 Mpa
Bending Elastic Limit (LOP) 15 – 20 Mpa
Bending Strength (MOR) 50 – 65 Mpa
Youngs Modulus 5 – 6 Mpa
Impact Strength (Charpy) 30 KJ/m²
Moisture Movement <1%
Fire resistance B.S.476 Part 6&7 – Class ‘O’
Freeze/Thaw resistance Excellent -Test specimens undamaged
Wet/Dry 50 Cycles Test specimens undamaged
Cast and laminated decorative mouldings, and with the inclusion of suitable glass reinforcements can be utilised for lightweight, high-impact panels. Jesmonite provides a fire resistant coating for many expanded foams for theme park and theatre props.
Solvent free – No VOC’s
Good abrasion resistance and impact strength
High Compressive and tensile strength
Rapid curing and high early strength gain